REF. 08753
EN
INSTRUCTION MANUAL
Power tools are repaired before use, when they are
damaged. Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Cutting tools properly
maintained with sharp edges are less prone to jam and
easier to control.
g) Use the power tool, accessories and tool tips, etc. in
accordance with these instructions and taking into account
the working conditions and the work to be carried out. The
use of the power tool for applications other than those
envisaged could cause a hazardous situation.
5) Use and care of the battery
a) Make sure the switch is in the off position before inserting
the battery. Inserting the battery into the power tools that
have the switch on invites accidents.
b) Recharge only with the charger specified by the
manufacturer. A suitable charger for a type of battery pack
may create a risk of fire when used with another battery
Safety Warnings
pack.
c) Use power tools only with specifically designated battery
packs. The use of any other battery pack may create a risk of
injury and fire.
d) When the battery is not in use, keep it away from other
metal objects such as paper clips, coins, keys, nails, screws or
other small metal objects that can make a connection from
one terminal to another. Shorting the terminals of the
battery may cause burns or a fire.
e) In abusive conditions, the liquid can be expelled from the
battery; avoid contact. In case of accidental contact, rinse
with water. If the liquid comes in contact with the eyes, also
seek medical help. Liquid ejected from the battery may
cause irritation or burns.
6) Technical service
a) Have your power tool checked by a qualified repair service
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
Mouse Sander
Special safety instructions
• This tool is not suitable for wet sanding. Never use the water
during working!.
• Never use the same sanding sheet for wood and metal.
Please make sure the sanding sheet can be used in working
place.
• Wear dust mask when using the machine.
• Exposure to the dust can cause hearing loss.
• Do not touch the moving sanding sheet.
• Do not continue to use worn, torn or heavily clogged
sanding sheets.
• Do not work materials containing asbestos. Asbestos is
considered carcinogenic.
• Secure the work piece (a work piece clamped with
clamping devices or in a vice is held more securely
than by hand).
Extra safety regulations concerning battery
To ensure the longest battery life and best battery
performance, always charge the battery when the
temperature is between 18-24°C. Do not charge the battery
pack when the temperature is below 0°C, or above 45°C. This
is important. Failure to observe this safety rule could cause
serious damage to the battery pack.
Do not incinerate the battery pack even if it is seriously
damaged or can no longer hold a charge. The battery pack
can explode in a fire.
A small leakage of liquid from the battery pack may occur
under extreme usage or temperature. This does not
necessarily indicate a failure of the battery pack. However, if
the outer seal is broken and this leakage comes into contact
with your skin:
.
Wash the affected area quickly with soap and water.
.
Neutralise the liquid with a mild acid such as lemon juice or
vinegar. If the leakage gets in your eyes:
.
Flush your eyes with clean water for a minimum of 10
minutes and seek immediate medical attention. Inform the
medical staff that the liquid is a alkaline solution.
Never attempt to open the battery pack for any reason. If the
plastic housing of the battery pack breaks open or cracks,
immediately discontinue its use and do not recharge it.
Do not store or carry a spare battery pack in a pocket or
toolbox or any other place where it may come into contact
with metal objects. The battery pack may be short circuited
causing damage to the battery pack, burns or a fire. If storing
or disposing the battery pack, cover the terminals with a
heavy insulation tape to ensure short circuit cannot occur.
Batteries, when stored for a long period of time, will
discharge. Do not store or use the tool and battery pack in
locations where the temperature may reach or exceed 40°C
such as alongside sheds or metal structures in the summer.
Allow the battery pack to cool down after charging. Do not
place it in a hot environment such as a metal
shed or open trailer left in the sun.
Only charge the battery with the charger supplied.
Do not put the battery pack near fire or high temperature
position.
Do not splash or immerse in water or other liquids. This may
cause premature cell failure.
When transporting individual batteries, make sure that the
battery terminals are protected and well insulated from
materials that could contact them and cause a short circuit.
The best storage place is one that is cool and dry away from
direct sunlight and excess heat or cold.
If the battery pack has been stored for a long time, you
should activate the battery pack first before using it.
The battery is to be disposed of safely.
This device can be used by non-specialized people as long as
they are under supervision.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision. For indoor use only
