Battery-Powered Trolley Style Multifunction Sprayer
5
The battery pack has a discharge protection function, which automatically stops charging when the battery is
fully-charged. Please turn off the power switch immediately to avoid damaging the battery.
When in use, user should check the sprayer connections for leaks, first with a water spray test and also
when installing the sprayer.
When adding water, it cannot exceed the safe water level line. Then do test sprays of 10 times or more so
that the barrel pressure will increase to the level of the working pressure.
When spraying is done, pour out the barrel residual liquid, rinse the sprayer, and then dry it out.
When the sprayer will not be used for a long time, clean the main parts, dry them up, and then placed them
in a cool, dry place.
Turn off the power immediately after each charging, it can prolong the life of the battery.
If the sprayer is not going to be used for a long time, clean the various components of the sprayer. Charge
the battery pack every 1
– 2 months to ensure that the battery does run out of power, which can extend the
battery life.
This machine is equipped with a three-hole nozzle and a powder surface applicator. Choose different spray
nozzles according to different environmental requirements.
This machine is installed battery door on the back. If the spraying area is larger, can also prepare a battery
pack, open the battery door can be replaced.
Use clean water; this machine is equipped with a special filter.
WARNING
!
When the battery is discharging, it will completely go into protection state. Please turn off the power switch
immediately. Do not frequently start the sprayer after this, as this could easily damage the battery and shorten its
service life.
After discharging for a long time, the temperature of the battery pack will rise. Please let the battery rest for a
certain period of time after you charge it.
Avoid water being sprinkled onto the barrel wall, as water can flow along the barrel wall and trickle down to the
battery socket position, which might cause the battery pack to short-circuit
Maintenance
Daily Maintenance and Storage
At the end of each use, clean the sprayer according to the following instructions:
The sprayer kit must not have any residual powder or liquid.
Clean the sprayer’s surfaces from any stains and dust.
Use water to wash the sprayer kit, especially at the tips of the rubber pieces.
Check whether the connection has any water leakages.
After maintenance, the sprayer should be put in a dry and well-ventilated place, do not expose to damp
conditions, and avoid direct contact with sunlight.
The battery pack should be charged promptly to maintain the battery’s life.