background image

MAX

HOLD

6

MIN

HOLD

MAX

MIN

4.3. Func. key

1. When the meter is switched ‘on’ and the required unit (rps or rpm) has been

set press the F

FU

UN

NC

C.. key to display the Maximum or Minimum value settings.

This is acknowledged with the symbol                                            on the LCD
display.

3. The F

FU

UN

NC

C.. key also shows the number of impeller setting available. 

To activate the settings follow this rotation course.

press F

FU

UN

NC

C.. key                            press F

FU

UN

NC

C.. key

press F

FU

UN

NC

C.. key           The number of impeller setting           press F

FU

UN

NC

C.. key

no. 1 - 9

(select)

4. Using the numbers in the impeller setting mode:

- When the meter is switched ‘on’ and the required unit (rps or rpm) has been 

set press the F

FU

UN

NC

C.. key until the impeller number ‘

no. 1

’ appears on the LCD.

- Press the    key to increase the number of impeller (numbers range from 

1-9) and then press the F

FU

UN

NC

C.. key again to exit the state of setting.

5 .   M a i n t e n a n c e
5.1. CLEANING INSTRUCTIONS

The meter may be wiped down with a damp (not wet) or cloth using a mild water
based detergent or anti-bacterial soap and rinsed under a gentle stream of cold
water.
N

NO

OT

TE

E:: This unit is not designed for complete submersion or washing in water.

EDI-315-4200K_Instructions.qxd  16/04/2010  14:09  Page 6

Summary of Contents for TNC150









Reviews: