Getting started
Let’s get Edison ready to go!
Open the battery compartment and
remove the programming cable. Now
insert 4 ‘AAA’ batteries. Refer to the
image to ensure that the batteries are
the correct way around and clip the
battery cover on.
If you haven’t already done so, stretch
the tyres over the wheels.
Turn Edison on by sliding the power
switch to the on position
. Edison’s
red LED lights will now start
flashing.
Edison is ready to go!
Ensure the batteries are the right way
Push the switch towards the on symbol
Summary of Contents for Edison Robot V2.0
Page 10: ......
