OPERATIONS MANUAL FOR EDISON PROFESSIONAL
Introduction:
Congratulations on your purchase of an EN-1600 powered loudspeaker, engineered
and manufactured by Britelite Enterprises. The EN-1600 includes a high-output
compression driver, and 15” woofer to produce an even, smooth studio quality sound
in a sound reinforcement speaker. Our design goal was to build a speaker with
accurate playback, smooth dispersion of mid and high frequencies and an ergonomic
design for easy transport and setup. The result is a sound reinforcement system
dynamic enough to use at home, in the studio, parties or in home theater.
Features:
2-way amplified Active Speaker
1X15” Long-throw woofer with high-temperature voice coil
Ultra-wide, smooth dispersion of high and mid frequencies
Mic/Line input and pass-thru connector
USB & SD Card input supports .wav & MP3
Bluetooth Compatible with TWS
LED lighting
Cautions:
1. All Operating Instructions should be read before using this equipment.
2. To reduce the risk of electrical shock, do not open this unit. There are NO
REPLACEABLE PARTS INSIDE. Please refer servicing to a qualified service
technician.
3. Do not expose this unit to direct sunlight or to a heat source such as a radiator or
stove.
4. This unit should only be cleaned with a damp cloth. Avoid solvents or other
cleaning detergents.
5. When moving this equipment, it should be placed in its original carton and
packaging. This will reduce the risk of damage during transit.
6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
7. DO NOT US ANY SPRAY CLEANER OR LUBRICANT ON ANY CONTROLS OR
SWITCHES
8. Make sure All of your equipment is completely OFF and lower ALL VOLUME,
LEVEL & GAIN controls before connecting a sound source.
9. Only LINE LEVEL SIGNALS SHOULD BE SENT TO YOUR SPEAKER.
Disregarding any of the above will void your warranty!!!!
