1. Main Menu
•
Make sure that you have properly installed and connected the cables of the receiver . If the
receiver is the factory status or there is no program list, when power on, the Main Menu window
will be displayed on the screen.
During the normal TV/Radio mode, press
MENU
key on the RCU to enter into the
Main Menu
window.
•
This menu consists of 7 major sub-menus as follow
- Program
- Picture
- Channel Search
- Time
- Language
- System
- USB
•
During the installation the
OK
key confirms a selection.
Use the
PR+, PR-
key to move upwards and downwards from one line to another line and
use key
to move from main menu to sub menu and move from left side
to right side or vice versa.
You can exit the Menu display at any time, by pressing the
MENU
or
EXIT
button on the
RCU
4. Software update
4.1 OAD
Select OAD upgrade, the system will search OAD channels automatically
4.2 USB Upgrade
Press OK to upgrade through USB Device.
5. Factory set User passwords:
Program Edit:
The default password is
“000000”.
Parental Guidance:
The default password is
“000000”.
Set Password:
The default password is
“000000”.
Restore Factory Default:
The default password is
“000000”.
RCU
MENU INFORMATION
GENERAL INFORMATION
MENU INFORMATION
MENU INFORMATION
TROUBLE SHOOTING
7
6
9
10
11
8
MENU INFORMATION
2. Channel Search
2.1 Auto Search
To search channels, please enter
Auto Search
mode and press
OK
button.
During the initial search, all TV and Radio channels will be displayed on the list.
By looking at the bar diagram at the bottom of the search window,
the user can view the search progress. Received TV and Radio channels
will appear on the list, with total number on top of window.
To cancel the search progress, please press
EXIT
key. To confirm the finish
of searching mode and return to operation mode, please press
EXIT
when searching procedure is done.
2.2 Manual Search
Frequency channel:
Press
key to select the channel
Frequency:
Press number key to select.
Bandwidth:
Press
keys to select among 6,7 and 8M
After setting, press OK key to enter into the search mode window.
On the 2-colour bar at the bottom of the search window, user can monitor signal quality
and strength of the specific channel.
Press
OK
button to enter search window after setting.
3. Restore Factory Default
Please select
RESTORE FACTORY DEFAULT
and press
OK
to confirm
the start of the procedure. When finished, please press
EXIT
to return to normal use.
NOTE:
Please use this function with caution as ALL user configured menus
will be changed to factory default ones.
•
Note:
If you have tried all of the actions suggested above, without solving the
problem, please contact your dealer or service provider.
Key
0~9
TV/RADIO
EPG
FAV
FIND
INFO
MENU
OK/LIST
PR+, PR-
EXIT
TXT
REC
Function
•
The above diagram is only for reference, please make sure it applies to your device.
Standby On/Off
Sound Mute
Switches between TV and Radio mode
EPG (Electronic Program Guide) function selection
Displays the favorite grouplist
Display the Find window
Show information of the current channel
Press this key one time to run menu onscreen
Switches back to previous channel
Switch to subtitle mode
Display the Audio window
Switch to teletext mode
Start Recording
Play and pause
Stop playing
Press to fast forward or fast backward
Moves up / down a page in the list
Previous and next in media player list
Executes the selected item in the menu screen
or enters the desired value in any input mode
When watching a channel, change channels or
move to the next higher or lower item in the menu
When watching a channel, adjust the volume or
move to the left or right item in the menu
Return to the previous menu on the menu
screen or escape from the menu
Channel number selection
and menu number entry
Main-menu
Sub-menu
Problem
Possible causes
What to do
Program
Program Edit
EPG
Sort
LCN
Aspect Ratio
Resolution
TV Format
Video Output
Time Offset
Country Region
Time Zone
Auto Standby
Power On/Off
OSD Language
Subtitle Language
Audio Language
Digital Audio
Audio Description
Parental Control
Set Password
Restore Factory Default
Information
Software Update
Multimedia
Photo Configure
Movie Configure
PVR Configure
Auto Search
Manual Search
Country
Antenna Power
RF System
RF Channel
Picture
Channel Search
Time
Language
System
USB
The display on the front
panel does not light up.
Front panel red light is on,
but there is no Audio/Video
although turned ‘ON’ with
IR remote control
No sound or picture.
Bad picture / blocking error.
The RCU is not working.
There is interference on
your terrestrial program or
video signal.
Main cable is not connected.
Signal cable not connected or
improperly connected
No signal or weak signal.
Signal is too strong.
Battery exhausted.
Antenna noise factor too high.
RCU is incorrectly aimed.
The system is connected by RF
leads and the output program of the
receiver interferes with an existing
terrestrial programs or Video signal.
The antenna is faulty
Check that the main cable is plugged
into the power socket.
Please check that the antenna signal
plug is properly commected to the right
plug on the receiver.
Connect a signal attenuator to the
antenna input.
Change the batteries.
Change to an antenna with lower
noise factor.
Aim RCU at the receiver, or check that
nothing blocks the front panel.
Change the receiver output channel
number to a channel number away from
adjacent operating ones or connect the
receiver to TV using scart cable.
Change the antenna.
Check the cable connections, antenna
and other equipment connected
between the antenna and the receiver.
