10
CH:
Shows the selected RF output
chan nel in the DVB-T or ISDB-T
terrestrial sig nal modulation
selection. Use the
“Up”, “Down”
keys
to change the selection
FR:
Shows the selected RF
output fre quency on the DVB-C
modulation cable signal. With the
«Up», «Down» keys
you change
the selection.
QAM
:
Shows the QAM in the
DVB-C modulation. Use the
“Up”, “Down” keys
to change
the 16QAM, 32QAM, 64QAM,
128QAM or 256QAM selection.
ID:
Shows the current ID. Use
the
keys Up & Down
to set the
desired ID.
RF:
Shows the RF output level.
Use the
keys Up & Down
to
adjust to the desired RF level.
LCN:
Shows the current LCN type.
Use the
keys Up & Down
to set
the desired LCN type.
FACT:
Factory defaults. Press
key UP
to restore factory defaults.
CFG:
Configuration file extraction.
Press
key UP
to extract the
current configuration to the USB
storage device.
SOFT:
Shows the SW version.
Use the
key Up & Down
to
display the current SW version.
STAN:
Shows the TV STANDARD
mod ulation signals. Use the
“Up”, “Down” keys
to change
the DVB-T, DVB-C, or ISDB-T
selection.
To save the selected configuration press once the
MENU/OK
key and confirm with
YES or NO
by pressing the
LEFT and RIGHT
keys and press
MENU/OK
key once again. The configuration
is being saved, please DO NOT power off the unit! This procedure must be made separately, in
each one of the 4 MODULATOR displays (MOD1, MOD2, MOD3, MOD4).
