STEP 02: CLEAN THE LIGHT
Cleaning: Cleaning the glass and photocell sensor surface of the post light,
with a soft and damp cloth.Dust will affect the sensitivity of photocell and
brightness of the post light.
Please Note:
(1)The lights will turn on immediately when being installed first time.
(2)The photocell sensor detecting time is 30-60S.
(3)Installation Position Requirements:
1- Please install it in a position facing the sun, avoiding shades, eaves
or other dark positions;
2- Also please do not install it around other light source position, which
might cause light interference.
The lamp structure is described as following picture:
STEP 05: POWER ON
Turn on the main (Master) switch to get the power back, the Light will turn
on automatically at dusk and off at dawn.
STEP 04: FIX THE LIGHT
You can fix the lamp in one of two ways:
Method 01: Install it on a 3-inch diameter post light pole(not include).
Method 02: Installed it on the door pier or other planes(bigger than 5.7”×
5.7”) through the pier mount base(in pack list).
STEP 03: CONNECT THE WIRE
Connect black live wire, white neutral wire and ground wire with wire
connectors,be sure that the wires are connected together sturdily.
03
