CMU 200 - User manual
4 INSTALLATION
4.1 INSTALLATION
Warning!
Hazardous voltage is present inside the device during operation. Disregarding of safety
rules can result in severe personal injury or property damage.
Only qualified personnel may work with described devices after being familiar with warnings and
safety notices in this paper and other safety regulations.
Following instruction must be taken into consideration:
The device must be accessible to qualified personnel only.
The device is permitted to operate in enclosed housing or cabinet only.
The device location must be vibration-free.
The admisible operating temperature must be observed.
Check the device for damage at unpacking. If device is damaged it must not be
installed but It should be send to the manufacturer for repair.
The device should not be opened.
The device should be mounted on 19" rack via 4x M6x10 mm screws
Attach ground wire before attaching power supply. Device must be grounded during
operation!
The power supply of the device should be provided with an external disconnector for
the safety isolation and with safety device (fuse) 2AT or 4AT. Both should be
mounted close to the device.
Single core or stranded wire 0.5 – 2.5 mm
2
must be used for power supply
connection. If stranded wire is used ferrules must be used to prevent fraying.
Recommended stripping lenght is 5 mm.
The prescribed bending radius of the optical fibre cables must be observed.
Page:
Company:
Device:
Document:
Code:
Version:
Date:
22
Ediseja 21 CMU 200
User manual CMUMU200
V3
01.02.13
Summary of Contents for CMU 200
Page 1: ...CMU 200 User manual ...
