manualshive.com logo in svg

Edirol V-4, Owner'S Manual

Share
Download
Edirol V-4 Owner'S Manual Download Page 4

 

4

 

015

 

• Do not force the unit’s power-supply cord to share 

an outlet with an unreasonable number of other 
devices. Be especially careful when using 
extension cords—the total power used by all 
devices you have connected to the extension 
cord’s outlet must never exceed the power rating 
(watts/amperes) for the extension cord. Excessive 
loads can cause the insulation on the cord to heat 
up and eventually melt through.

..........................................................................................................

 

016

 

• Before using the unit in a foreign country, consult 

with your retailer, the nearest Roland/Edirol 
Service Center, or an authorized Roland/Edirol 
distributor, as listed on the “Information” page.

..........................................................................................................

 

022b

 

• Always turn the unit off and unplug the AC 

adaptor before attempting installation of the 
Video Fader.

..........................................................................................................

 

101b

 

• The unit and the AC adaptor should be located so 

their location or position does not interfere with 
their proper ventilation.

..........................................................................................................

 

102c

 

• Always grasp only the plug on the AC adaptor 

cord when plugging into, or unplugging from, an 
outlet or this unit.

..........................................................................................................

 

103b

 

• At regular intervals, you should unplug the AC 

adaptor and clean it by using a dry cloth to wipe 
all dust and other accumulations away from its 
prongs. Also, disconnect the power plug from the 
power outlet whenever the unit is to remain 
unused for an extended period of time. Any 
accumulation of dust between the power plug and 
the power outlet can result in poor insulation and 
lead to fire.

..........................................................................................................

 

104

 

• Try to prevent cords and cables from becoming 

entangled. Also, all cords and cables should be 
placed so they are out of the reach of children.

..........................................................................................................

 

106

 

• Never climb on top of, nor place heavy objects on 

the unit.

..........................................................................................................

 

107c

 

• Never handle the AC adaptor or its plugs with 

wet hands when plugging into, or unplugging 
from, an outlet or this unit.

..........................................................................................................

 

108b

 

• Before moving the unit, disconnect the AC 

adaptor and all cords coming from external 
devices.

..........................................................................................................

 

109b

 

• Before cleaning the unit, turn off the power and 

unplug the AC adaptor from the outlet.

..........................................................................................................

 

110b

 

• Whenever you suspect the possibility of lightning 

in your area, disconnect the AC adaptor from the 
outlet.

..........................................................................................................

 

115a

 

• For installation of the Video fader, remove only 

the specified screws.

..........................................................................................................

 

118a

 

• Should you remove screws, keep them in a safe 

place out of children’s reach, so there is no chance 
of them being swallowed accidentally.

..........................................................................................................

V-4_e.book 4 ページ ２００７年１０月１７日　水曜日　午後７時１５分

Summary of Contents for V-4

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands