manualshive.com logo in svg

Edirol UM-1EX, Owner'S Manual, Page: 5 / 80

Share
Download
Edirol UM-1EX Owner'S Manual Download Page 5

 

5

Handling CD-ROMs

 

801

 

•

Avoid touching or scratching the shiny underside 
(encoded surface) of the disc. Damaged or dirty 
CD-ROM discs may not be read properly. Keep 
your discs clean using a commercially available 
CD cleaner.

 

204

 

*

Microsoft and Windows are registered trademarks of Microsoft Corporation.

 

206e

 

*

The screen shots in this document are used in compliance with the guidelines of the Microsoft Corporation.

 

206j

 

*

Windows

 

®

 

 is known officially as: “Microsoft

 

®

 

 Windows

 

w

 

 operating system.”

 

207

 

*

Apple and Macintosh are registered trademarks of Apple Computer, Inc.

 

209

 

*

Mac OS is a trademark of Apple Computer, Inc.

 

220

 

*

All product names mentioned in this document are trademarks or registered trademarks of their respective 
owners.

 

231

 

*

OMS is a registered trademark of Opcode Systems, Inc.

 

232

 

*

FreeMIDI is a trademark of Mark of the Unicorn, Inc.

UM-1EX_multi1.book 5 ページ ２００５年１１月１日　火曜日　午後３時１９分

Summary of Contents for UM-1EX

















































































Reviews:

No comments