Edirol PR-80 Owner'S Manual Download Page 33

Page: 33 / 144

Introduction to Use of the PR-80

Names of Things in Screens/What They Do

Selector

This is what first appears when you turn on the power to the PR-80.
The Presenter starts up from here. Also shown here are screens for managing projects on hard disks
and for setting the PR-80 system preferences.

fig.selector01.eps

a. [Editor] Button

This starts the DV-7DL PRO.

b. [Presenter] Button

This starts up the Presenter. The Presenter features two modes, Play mode (p. 34) and Edit mode (p.
37).

c. [Utility] Button

This calls up the Utility screen (p. 40). This is used for organizing the projects on the hard disk.

d. [System Preferences] Button

This calls up the System Preferences screen (p. 41). These settings affect the PR-80’s overall system
environment.

e. [Power off] Button

This shuts off the power to the PR-80 (p. 44).

PR-80_e.book 33 ページ２００５年１月６日　木曜日　午後９時２２分

Summary of Contents for PR-80

















































































































































Search results

Summary of Contents for PR-80

Reviews:

Related manuals for PR-80

Brands by name

Popular brands

Edirol PR-80, Owner'S Manual

Search results

Summary of Contents for PR-80

Reviews:

Related manuals for PR-80

Brands by name

Popular brands