Edirol PCR-M30, Owner'S Manual

Page: 45 / 124

45
Use MIDI functionality
You can switch modes at any time, as shown below.
You are returned to Play mode once a setting or a process has been completed within the other
modes. If you want to return to Play mode without completing a setting or operation, press the
button for the current mode (i.e., the button that is lit). Alternatively, press the
[CANCEL]
button. The setting you were in the process of making will be discarded.
Table of operating modes
Mode Switching modes Explanation
PLAY mode
(p. 46)
When you turn on the power, the PCR-M30/50/
80 will start up in PLAY mode.
Transmit MIDI messages
by playing the keyboard
or operating the control-
lers.
MIDI Channel mode
(MIDI CH)
(p. 48)
Press the
[MIDI CH]
.
Set the transmit channel
(
Current channel (p. 48))
for the keyboard, bender
lever.
Program Change mode
(PROGRAM CHANGE)
(p. 51)
Press the [PGOGRAM
CHANGE] .
Transmit program change
messages on the
Current
channel (p. 48).
Bank mode
(BANK)
(p. 52)
Simultaneously, press the
[PGOGRAM CHANGE]
and the [MIDI CH] .
Transmit bank select mes-
sages (MSB, LSB) on the
Current channel (p. 48).
Panic mode
(PANIC)
(p. 53)
Simultaneously, press the
[PGOGRAM CHANGE]
and the [EDIT] .
Stop “stuck” notes or oth-
er problems with the
sound on a connected
MIDI sound module.
Memory mode
(MEMORY)
(p. 54)
Press the [MEMORY] .
Recall a memory set from
internal memory into the
current memory (p. 84).
Snapshot mode
(SNAPSHOT)
(p. 55)
Simultaneously, press the
[MEMORY]
and the
[MIDI
CH]
.
Transmit the current val-
ues of controllers ([R1--
R8] or [S1--S8]) at once.
Edit mode
(EDIT)
(p. 56)
Press the [EDIT] .
Assign MIDI messages to
the controllers, transmit/
receive bulk data, or make
system settings.
PCR-M30/50/80.book 45 ページ ２００５年１１月１０日 木曜日 午後２時４９分