54
Use MIDI functionality
When the PCR-M30/50/80 is shipped, its internal memory contains sixteen different settings.
For details on the contents of each memory number, refer to
“Memory sets”
You will use Memory mode to change the Memory sets.
fig.memory-1_80
fig.memory
1
Press the
[MEMORY]
button.
The
[MEMORY]
button will light. The display will indicate the memory
number that you selected most recently.
2
Use the
[DEC][INC]
buttons or the
[0]
-
[F]
keys of the keyboard to specify the memory number
that you want to recall.
3
Press the
[ENTER]
button.
The setting will be cancelled if you press another button instead of the
[ENTER]
button.
The memory has now been recalled.
Changing the Memory Sets
Memory mode (MEMORY)
1
2
3
For details on customizing (editing) the controller settings, refer to
“Assign MIDI messages”
If you edit the controller settings of a memory you recall, and want to keep your changes, you must
save the memory before powering down the PCR-M30/50/80. For the procedure, refer to
“Saving a
memory set”
PCR-M30/50/80.book 54 ページ ２００５年１１月１０日 木曜日 午後２時４９分
