21
Getting Connected and Installing Drivers (Windows)
Windows Me/98 users
1
With the PCR-A30 disconnected, start up Windows.
Disconnect all USB cables except for a USB keyboard and USB mouse (if
used).
If you are using virus checking or similar software, be sure to exit it as well.
2
Exit all currently running software (applications).
Also close any open windows. If you are using virus checking or similar
software, be sure to exit it as well.
3
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
4
Click the Windows
Start
button. From the menu that appears, select
Run...
.
The
Run...
dialog box will appear.
fig.05-13_
30
5
In the dialog box that appears, input the
following into the
“Open”
field, and click
[OK]
.
(drive name) : \Driver\USB_ME98\SETUPINF.EXE
* In the explanatory example shown here, the drive name is given as
“D:”
. The drive
name
“D:”
may be different for your system. Specify the drive name of your CD-
ROM drive.
The
SetupInf
dialog box will appear.You are now ready to install the driver.
6
Use the following procedure to connect the PCR-A30 to your computer.
1.
With the
power switch
turned
OFF
, connect the included
AC adaptor
to the
PCR-A30
.
2.
Connect the
AC adaptor
to an electrical outlet.
3.
Use the
USB cable
to connect the
PCR-A30
to your
computer
.
7
Set the PCR-A30’s power switch to the
“DC”
position, and turn on the
power.
The driver will be installed automatically.
8
In the SetupInf dialog box, click
[OK]
.
* If a message recommends that you restart Windows, restart Windows as directed.
9
Next, make MIDI device and audio device settings (p. 22).
To check the drive name
In the Windows desktop,
double-click the
My
Computer
icon. In the
window that appears,
check the drive name of
the CD-ROM drive into
which you inserted the
CD-ROM in step7.
The drive name is the (D:)
or (E:) displayed by the
CD-ROM drive
.
Once the connections have
been completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong
order, you risk causing
malfunction and/or
damage to speakers and
other devices.
This unit is equipped with
a protection circuit. A brief
interval (a few seconds)
after power up is required
before the unit will operate
normally.
You may be requested to
install a USB hub.
In this case, perform the
installation as directed by
the dialog box that
appears.
PCR-A30_e2.book 21 ページ ２００３年１０月２２日 水曜日 午後３時１９分
