17
Getting Connected and Installing Drivers (Windows)
Windows 2000 users
1
With the PCR-A30 disconnected, start up Windows.
Disconnect all USB cables except for a USB keyboard and USB mouse (if
used).
If you are using virus checking or similar software, be sure to exit it as well.
2
Open the
System Properties
dialog box.
Click the Windows
Start
button, and from the menu that appears, select
Settings | Control Panel
. In
Control Panel
, double-click the
System
icon.
fig.05-2-00_30
3
Click the
Hardware
tab, and then click
[Driver Signing]
.
The
Driver Signing Options
dialog box
will appear.
4
Make sure that
“File signature verification”
is set to
“Ignore”
.
If it is set to
“Ignore”
, simply click
[OK]
.
If it is not set to
“Ignore”
, make a note of the current setting (
“Warn”
or
“Block”). Then change the setting to
“Ignore”
and click
[OK]
.
5
Click
[OK]
to close the
System Properties
dialog box.
6
Exit all currently running software (applications).
Also close any open windows. If you are using virus checking or similar
software, be sure to exit it as well.
7
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
8
Click the Windows
Start
button. From the menu that appears, select
“Run...”
The
“Run...”
dialog box will appear.
Log on to Windows as a
user with administrative
privileges (such as
Administrator)
If you changed
“File
signature verification”
,
you must restore the
previous setting after you
have installed the driver.
(
➝
PCR-A30_e2.book 17 ページ ２００３年１０月２２日 水曜日 午後３時１９分
