6
Programming
Programming AT-100 requires the Audio Guide Updater ATC-110U (part no 590111). Please
see separate ATC-110U manual for complete description.
Programming AT-100
1. Turn the AT-100 off (8)
2. Plug in the ATC-110U and turn it on, switched to ”UPDATE MODE”
3. Connect ATC-110U with a computer or laptop via USB cable
4. Allocate the AT-100 to any slot of the ATC-110U. The ”LINK” LED turns green upon
successful link. If the linkage is unsuccessful ”ERR” LED is lit.
5. Start the updating program (provided with ATC-110U) on your computer and update
the audio files
Troubleshooting
No sound is audible
• Verify that the volume is turned up
• Verify that the audio track is working properly
• Verify that the right folder is active (default channel number 951 + PLAY (6))
AT-100 suddenly turns off
• Verify that the battery LED (7) is green, LED shines red/orange to indicate low battery
• Rechargeable batteries deteriorate over time, check the batteries every 12 months
• Always switch both batteries when changing
