8
II.
Installation
This section will guide you through the steps to connect your RE-7478MK1 to
the EdiMESH App.
II-1.
Hardware Installation
Please follow the steps below:
1.
Connect a power supply to each node.
2.
Connect the master to the router using Ethernet cables. One of the nodes
has a Master sticker while the other two have Slave stickers, indicating
their relationships.
NOTE: Make sure the Ethernet cable is connected to the “LAN1” port of the
Master node as shown below:
3.
Please wait power and Internet LEDs (LAN1) are turned on.
