Edimax LAN USB Adapter User Manual Download

Page: 5 / 58

- 4 -

1-2 Safety Information

In order to keep the safety of users and your properties, please follow the following safety instructions:

1. This USB wireless network card is designed for indoor use only. DO NOT expose this network card to direct

sun light, rain, or snow.

2. DO NOT put this network card at or near hot or humid places, like kitchen or bathroom. Also, do not left this

wireless network card in the car in summer.

3. This network card is small enough to put in a child’s mouth, and it could cause serious injury or could be fatal.

If they throw the network card, the card will be damaged. PLEASE KEEP THIS NETWORK CARD OUT THE

REACH OF CHILDREN!

4. This network card will become hot when being used for long time (

This is normal and is not a

malfunction)

. DO NOT put the network card on a paper, cloth, or other flammable objects after the network

card has been used for a long time.

5. There’s no user-serviceable part inside the network card. If you found that the network card is not working

properly, please contact your dealer of purchase and ask for help. DO NOT disassemble the network card by

your self, warranty will be void.

6. If the network card falls into water, DO NOT USE IT AGAIN BEFORE YOU SEND THE CARD TO THE

DEALER OF PURCHASE FOR INSPECTION.

7. If you smell something strange or even see some smoke coming out from the network card, switch the

computer off immediately, and call dealer of purchase for help.

Summary of Contents for LAN USB Adapter



























































Search results

Summary of Contents for LAN USB Adapter

Reviews:

Related manuals for LAN USB Adapter

Brands by name

Popular brands

Edimax LAN USB Adapter, User Manual

Search results

Summary of Contents for LAN USB Adapter

Reviews:

Related manuals for LAN USB Adapter

Brands by name

Popular brands