Edimax IC-3040IWT, User Manual

Page: 52 / 55

52
a restart. Restarting will not affect the
camera’s current configuration.
Reset to default Select “Keep Network Settings” or “Default
Settings” and then click “Reset to Default”.
When the camera resets, “Keep Network
Settings” will reset all settings but keep the
current network settings. The network
camera’s IP address will remain the same.
“Default Settings” will reset all of the
camera’s settings, including network settings,
back to the factory default status.
IV-6. Status
The “Status” menu provides important information about the status of the
network camera. This information is useful for troubleshooting purposes or
for network configuration.
IV-6-1. System Information
A summary of system-wide information about the network camera is
displayed on this page, displayed under four categories: System, LAN, Wireless
LAN and IGD (UPnP Port Forward).