Edimax IC-3005 Series, Manual, Page: 8 / 20

8
4. Hardware Installation
1. Unpack your Edimax IP Camera from its packaging and ensure
that all the items listed in Chapter 1 are there.
2. Connect the Edimax IP Camera to your network by attaching a
network cable from your switch or router to the LAN port on the
IP Camera.
3. Connect the power adapter to the IP Camera and plug the
adapter into a power outlet. When the IP Camera is ready, the
Blue LED will light up.
Note: It is highly recommended to use only the power adapter
shipped with the IP Camera. Do NOT use any other power adapter
and avoid possible damage to your new device.