4
I-5. Reset
If you experience problems with your access point, you can reset the device
back to its factory settings. This resets all settings back to default.
1.
Press and hold the reset button on the access point for at least 10
seconds. Then release the button.
You may need to use a pencil or similar sharp object to push the
reset button.
2.
Wait for the access point to restart. The access point is ready for setup
when the
green
power LED is
on
.
Summary of Contents for IAP1200
