27
authentication, please click on „Use 802.1x‟ box, then click „802.1X‟
tab to set 802.1x parameters.
To set 802.1x authentication for the access point. Please click „802.1X‟ tab:
Here are descriptions of every setup item:
Item Name
Description
EAP Method
Select 802.1x EAP method from dropdown menu. Please ask the
administrator of the access point you wish to connect to select a
correct EAP method.
Tunnel
Authentication
Select 802.1x tunnel authentication type from dropdown menu.
Please ask the administrator of the access point you wish to connect
to select a correct tunnel authentication method. This pull down
menu is only available when authentication type you use is 'PEAP',
„TLS / Smart Card', or 'TTLS'.
When you use 'EAP-FAST' as authentication type, the protocol
setting is always 'Generic Token Card' and can not be changed. You
also need to select „Soft Token‟ or „Static Password‟ as password in
„ID \ Password‟ setting.
‟EAP Fast‟ authentication type also have a sub-menu to set EAP
fast-specific parameters: