59
4-2-6. LACP
The switch supports the link aggregation IEEE802.3ad standard. This
standard describes the Link Aggregate Control Protocol (LACP), which is a protocol
that dynamically creates and manages trunk groups.
When you enable LACP link aggregation on a port, the port can automatically
negotiate with ports at the remote end of a link to establish trunk groups. LACP also
allows port redundancy, that is, if an operational port fails, then one of the “standby”
ports become operational without user intervention.
Function name:
LACP Port Configuration
Function description:
Enable or disable LACP protocol, user is allowed to set the aggregation key
value.
Parameter description:
Protocol Enabled:
Just tick the check box (
;
)
to enable LACP protocol then press the
<Apply>
button to apply.
Key Value:
It’s key for an aggregation. This must be an integer value between 1 and
255 or auto selected by switch.
Fig. 4-11 LACP Port Configuration
Summary of Contents for ES-5240G+
