Edimax ES-1008PL, Quick Installation Manual

Page: 8 / 13

7
Troubleshooting
1.
Power LED is not lit
Check if the power cord is properly connected to the plug and the
power outlet; make sure the power cord is firmly plugged into the
power socket of the switch.
2. LINK/ACT LED is not lit when connected to devices

Make sure the network device attached to the switch is turned on.

Make sure the network cable is properly connected to the switch
and the network device.

Make sure the network cable is a UTP cable that complies with
EIA/TIA 568 and Category 5 specifications.
[!] Contact your dealer if problem persist.