13
3.
Select
“Cable Modem”
, the system will move into next step
4.
Enter
”Host Name”
and
“MAC Address”
. (The
“Host Name”
can be blank) The MAC
Address is provided by ISP (e.g. NTL) or click
“Clone Mac Address”
button if you’re using the
computer’s MAC Address.
Confirm with your ISP about MAC Address used, Click
“OK”
button to save the settings then
reboot the router.
5.
After reboot, your router is now ready for Internet connection.
S
S
t
t
e
e
p
p
4
4
:
:
W
W
P
P
S
S
b
b
u
u
t
t
t
t
o
o
n
n
This wireless router supports two types of WPS: Push-Button Configuration (PBC), and PIN code.
If you want to use PBC, you have to push a specific button on the wireless client to start WPS
mode, and switch this wireless router to WPS mode too. You can push Reset/WPS button of this
wireless router, or click ‘Start PBC’ button in the web configuration interface to do this; if you want
to use PIN code, you have to know the PIN code of wireless client and switch it to WPS mode,
then provide the PIN code of the wireless client you wish to connect to this wireless router.
Antenna C
