24
that no one is using the Internet exceeds the “Idle Time”.
If you select “Manual”, the router will connect to ISP only
when you click “Connect” manually from the Web
management interface. The WAN connection will not
disconnect because of idle timeout. If the WAN line drops
and connected at a latter time again, the router will not
connect to the ISP by itself.
Idle Time
You can specify an idle time (minutes) for the WAN port.
This means if no packets have been sent (no one using
the Internet) during this specified period, the router will
automatically disconnect the connection to your ISP.
Note:
This “idle timeout” function may not work due to
abnormal activities of some network application software,
computer virus or hacker attacks from the Internet. For
example, some software sends data to the Internet in the
background, even when you are not using the Internet. So
please turn off your computer when you are not using it.
This function also may not work with some ISP. So please
make sure this function can work properly when you use
this function in the first time, especially when your ISP
charge you by the connection time.
Click <
OK
> when you have finished the configuration above. Congratulations!
You have completed the configuration for the PPPoE connection. You can start
using the router now, if you wish to use some of the advance features
supported by this router see chapter 2, 3, 4.
