User Manual
The following table describes the parameters of this page.
Field
Description
DHCP
Mode
If set to
DHCP Server
, the router can assign IP addresses, IP default gateway
and DNS Servers to the host in Windows95, Windows NT and other
operation systems that support the DHCP client.
IP
Pool
Range
It specifies the first IP address in the IP address pool. The router assigns IP
address that base on the IP pool range to the host.
Pool Size
It allows the size machines that can be set up
Show
Client
Click it, the
Active DHCP Client Table
appears. It shows IP addresses
assigned to clients.
Default
Gateway
Enter the default gateway of the IP address pool.
Max Lease
Time
The lease time determines the period that the host retains the assigned IP
addresses before the IP addresses change.
Domain
Name
Enter the domain name if you know. If you leave this blank, the domain
name obtained by DHCP from the ISP is used. You must enter host name
(system name) on each individual PC. The domain name can be assigned
from the router through the DHCP server.
DNS
Servers
You can configure the DNS server ip addresses for DNS Relay.
Set
VendorCla
ss
IP
Range
Click it, the
Device IP Range Table
page appears. You can configure the IP
address range based on the device type.
Click
Show Client
in the
DHCP Mode
page, the page shown in the following figure
appears. You can view the IP address assigned to each DHCP client.
