Edimax AR-7084A Page 21 User Manual Download

Page: 21 / 86

3.2. Manually

Set

ISP

If you cannot find the ISP from the wizard, please follow the procedures below to

set the ISP settings manually.

Before configuring the ISP manually, please check with your ISP (Internet

Service Provider) what kind of the service is provided such as PPPoE, PPPoA or

RFC1483/2684. Gather the information as illustrated in the following table and

keep it for reference.

PPPoE

VPI/VCI, VC-based/LLC-based multiplexing, Username,

Password (and Service Name).

PPPoA

VPI/VCI, VC-based/LLC-based multiplexing, Username,

Password.

RFC1483 Bridged

VPI/VCI, VC-based/LLC-based multiplexing to use Bridged

Mode.

RFC1483 Routed

VPI/VCI, VC-based/LLC-based multiplexing, IP Address,

Subnet Mask, Gateway Address, and Domain Name

System (DNS) IP Address (It is a fixed IP Address).

1. Please select “Other”.

Summary of Contents for AR-7084A























































































Search results

Summary of Contents for AR-7084A

Reviews:

Related manuals for AR-7084A

Brands by name

Popular brands

Edimax AR-7084A, User Manual

Search results

Summary of Contents for AR-7084A

Reviews:

Related manuals for AR-7084A

Brands by name

Popular brands