44
Parameter
Description
Multicast
Specify the method of transmitting data simultaneously to
many receivers. Please select “IGMP v1” or “IGMP v2”
as the multicast protocol or select “Disabled” to disable
the function.
IGMP Snoop
When “IGMP Snoop” (Internet Group Management
Protocol Snoop) is enabled, the router can make
intelligent multicast forwarding decisions by examining
the contents of each frame’s IP header. Without the
function, the router will broadcast the multicast packets to
each port and may create excessive traffic on the
network and degrade the performance of the network.
DHCP
Parameter
Description
DHCP
You can enable or disable the DHCP server. By enabling
the DHCP server the router will automatically give your
LAN clients an IP address. If the DHCP is not enabled
then you’ll have to manually set your LAN client’s IP
addresses.
Starting IP Address
If the DHCP Server is enabled, please set the “Starting
IP Address” which will be the first IP Address assigned to
the LAN client. By default, the “Starting IP Address” is
192.168.2.100
.
IP Pool Count
You can select a particular IP address range for your
DHCP server to issue IP addresses to your LAN Clients.
By default, the “IP Pool Count” is 100. The IP range is
starting from IP 192.168.2.100 to 192.168.2.199.
