30
ENGLISH
cLADDInG
2
1
3
4
5
FIttInG tHe tALLY F, tALLY s AnD tALLY UP s steeL cLADDInG
The cladding is in two packs.
One contains:
•
1 rear protective casing (1)
•
2 side panels (2)
•
1 top front panel (3) and, for the Tally UP S model, the front panel for the drawer
•
1 bag of hardware with:
- 22 self-tapping screws in total: for the side panels (4 = 2 per side), for the rear protective casing (10 = 2 for the top
and 4 per side on the brackets), 4 for the top front panel and 4 for the U-shaped plate and 4 additional screws for the
UP version;
- 6 M 4x9 grub screws: 4 to be fixed to the sides of the base for the side panels; 2 for the top
- 2 M 5 grub screws (normally not used)
- 2 M 5 nuts and 1 dome bolt to make the door self-closing (see specific paragraph)
The other pack contains:
- 1 top (4)
- 1 closure cap (5) if the outlet is at the rear
