EdilKamin fLAMMA, Installation, Use And Maintenance Manual, Page: 16 / 24

16
ENGLISH
FUEL
the stove was designed to burn wooden logs or
sawdust briquettes.
Use dry wood logs (max. humidity 20%) the use
of damp wood would cause the product and the
flue to get dirty, the risk of smoke and a lower yield
than that declared.each type of wood has different
characteristics that also influence combustion yield.
the data outlined on this manual are with wood used
during certification.
In general wood can have a heat of combustion up to
4.5 kWh/kg while cut fresh it has heat of combustion
around 2 kWh/kg
In general, beech or elm is recommended, or however
class A1 wood according to UNI eN IsO 17225-5
Attention to prolonged use of wood with aromatic oils
(e.g. eucalyptus). Cast iron parts can deteriorate
Use the recommended quantities of wood:
Overloading causes overheating, resulting in damage:
• possible deformation of the inner parts;
• possible irreversible changes to the colour of the
paint on the metal parts
for which edilkamin or the retailer cannot be held liable.
to respect the environment and safety, do NOt burn,
among other things: plastic, varnished wood, coal and
bark waste.
Do not use the stove as an incinerator.
Use of these fuels also nullifies the guarantee.
ISTRUCTIONS FOR USE
AIR LIMITATION
to increase or decrease the combustion air supply to
the chamber, adjust the air lever
(L) .
Proceed as follows:
position Description Effect
1 Ignition / maxi-
mum power Primary air sent
entirely to the
hearth.
2 Intermediate
position for normal
combustion
3 ember mainte-
nance Post-combustion
air only.
L
1 2 3