EdilKamin BILD Up, Directions For Installation, Use And Maintenance, Page: 6 / 64

6
ENGLISH
TECHNICAL CHARACTERISTICS pursuant to EN 14785 The data shown is purely indicative and was
measured during the certification phase at a notified body under standard conditions.
Nominal power Reduced power
Available power 9,1 4,4 kW
Yield 89 91,6 %
CO emissions at 13% O
2
0,019 0,016 %
Smoke temperature at smoke outlet 160 103 °C
Fuel consumption * 2 0,9 kg/h
Tank capacity 22 kg
Draw 12 10 Pa
Autonomy *** 11 24 ore
Volume riscaldabile ** 235 m
3
Smoke duct diameter 80 mm
Air intake duct diameter 40 mm
Weight including packaging 130 kg
Energy efficiency class in accordance with EU
regulation 2015-1186 (Classes A++/G)
A+
TECHNICAL DATA FOR SIZING THE FLUE
which must in any case satisfy the requirements of this sheet and the installation instructions
Nominal power Reduced power
Smoke temperature at smoke outlet 192 124 °C
Minimum draught 0,01 Pa
Smoke flow rate 7,5 4,73 g/s
CARATTERISTICHE ELETTRICHE
Power supply 230 Vac +/- 10% 50 Hz
Nominal absorbed power 45 W
Reduced absorbed power 130 W
Absorbed power in stand-by mode 2 kW
Power absorption during ignition 375 W
Remote control frequency (provided) 2,4 GHz
Protection rating Fuse 4 AT, 250 Vac 5x20
TECHNICAL DATA
USER/INSTALLER
EDILKAMIN S.p.A.
The manufacturer reserves the right to modify the product without notification in the
interests of improvement.
* A calorific value of 4.8 kW/kg was used to calculate consumption.
** The heatable volume is calculated based on the assumption of a heating demand of 33 Kcal/m³ hour.