30
ENGLISH
DAILY MAINTENANCE
These jobs should be done with the product off, cold
and preferably disconnected from the mains.
A suitable vacuum cleaner is required.
The entire procedure takes just a few minutes.
Operations are represented in the figures with the
same number on this page.
MAINTENANCE
Do not put the cleaning residues into the pellet tank.
Make sure that the ash tray, once refitted, is properly
positioned in its housing; if not the glass may break if it
hits it.
Ensure that the burning pot is properly positioned in its
housing following maintenance, otherwise the stove may
have problems igniting.
Before doing any maintenance, disconnect the appliance from the mains.
Regular maintenance is essential for keeping the appliance in good working order.
Failure to service the product properly will prevent it from working properly.
Any problems due to failure to service the stove will void the warranty.
1. Open the combustion chamber door (P) using the
removable handle provided.
2. Empty the ash tray (B) and burning pot into a
non-flammable container (the ashes may still
contain embers and/or hot parts) or vacuum if
cold. Vacuum out the interior of the combustion
chamber, the bed, and the compartment around
the burning pot into which the ash falls. The
burning pot consists of two parts (A1, and A2). It
slips into position in its housing.
3. Scrape the burning pot with the provided scraper
and clean out any obstructed holes.
4. If necessary, clean the glass when cold using a
dedicated product (e.g. Glasskamin), which your
dealer should have.
B
A2
A1
Using the stove without cleaning
the burning pot can cause the
gas in the combustion chamber to
ignite and lead to detonation
P
USER
1
2
A1
A2
