EDIFIER W855BT, Operating Instructions Manual

Page: 5 / 27

How to use the headphone
ON/OFF
Function
ON
OFF Operation
Switch to ON location
Switch to OFF location Indicator
Blue indicator light for 1 minute
Red indicator light for 1 minute
Note: if the headphone disconnects any device after turning on, it will be in
the standby mode all the time.
Pair with Bluetooth device
How to enter pairing mode
function
Enter pairing mode
operation
Switch the switch to Bluetooth
level for about 2 seconds
Red and blue indicator
blink alternately
indicator
Note: the paring mode will keep 2 minutes, if the headphone does not pair
with any device over 2 minutes, it will automatically switch to standby mode.
Pair with mobile phone
You need to pair the headphone to your mobile phone when you are in the
first time use.
1. Keep mobile phone and headphone within 1 meter.
2. Make the headphone enters pairing mode (see “How to enter pairing mode”).
3. Turn on the Bluetooth function on the phone, search Bluetooth devices
and select “EDIFIER W855BT”. When the connection is successful, it will
be an indicator tone and the blue indicator blinks twice every 4 seconds.
Note:
1. PIN code for connection is “0000” if needed.
2. After completing connection, headphone and phone will remember each
other. The headphone will automatically connect the latest connected
device in the next time use.
3. If the headphone can’t connect the device, press any buttons (MFB
button, volume increase button or volume decrease button), the
headphone will try to connect the latest connected device.
4. If the headphone disconnects the device due to out of the distance, it
can automatically reconnect device within 5 minutes return. If it is over
5 minutes, you need to press any buttons (MFB button, volume increase
button or volume decrease button) to connect the device.
3