How to place and
connect speakers:
This product is designed to be used on bookshelves or desktops. Please leave at least 1.5 meters
between the two speakers. For best results, keep a 1 meter distance or more away from the
speakers when listening.
How to place the speakers:
How to connect the speakers:
Connect one end of the speaker cable to the line out
sockets on the back of the active speaker, and the
other end to the line-in sockets on the back of the
non-active speaker. To ensure correct phase, be sure
to match red to red and black to black terminal
connectors. Please see the illustration figure for
details. Do not shorten the speaker cables. Make
sure the connections are tight and that there are no
short circuits across the terminals. The quality of the
speaker cables might affect the overall sound quality,
which the speakers produce. The use of Oxygen-free
copper (OFC) cables or other high quality cables as
an option, are highly recommended.
Connecting to a sound source:
Connect the line controller cable plug into
the dedicated socket, and then connect
the audio cable with the RCA plugs into
the RCA input sockets on the rear of the
active speaker. The 3.5mm jack plug may
be plugged into a soundcard, Discman,
or game console etc. Various
combinations of adapters will allow
different source hookups for special
purposes. Adjust the Volume control (or
line controller if connected) to a
comfortable listening level. When the line
control is plugged in, the volume control
knob on the back panel of the active
speaker is deactivated.
Connecting to the power:
After correctly connecting the speakers and audio
source, plug in the power supply. Please make sure
the local electricity voltage is correct for this product.
Please keep the power switch on the rear of the active
speaker switched to OFF when plugging into the
power outlet.
Diagram Nomenclature List:
7
Bass port
8
3.5 mm Headphone Plug
/RCA Plug Audio cable
9
Speaker cable
10
Line controller
11 User manual and warranty card
1
Non-active speaker
2
Active speaker
3
Tweeter
4
Front cover
5
Bass driver
6
Speaker input socket
Rear View of
Non-active Speaker
Front View of
Non-active Speaker
Rear View of
Active Speaker
