9
English
10
English
Wireless setup and pairing
Wireless setup and pairing
Note:
1. Pairing mode will last for 30 seconds. Whether pairing is complete or not the transmitter and receivers will
return to previous status after 30 seconds
2. When switching off transmitter (e.g. center speaker is in standby mode), the paired speakers (surround
speakers and subwoofer) will automatically enter standby state (Note: speaker maintains power consumption
lower than 0.5W in standby mode)
3. Surround speakers and subwoofer light indicator status as follows:
↑
Pair
Pair
3. Put surround speakers into pairing mode:
Make sure on all surround speakers.
Press “Pair” key in the back panel of each surround speaker until the indicator on the back panels flash
continuously.
4.Put subwoofer into pairing mode:
Power on the subwoofer
Then press “Pair” key at bottom of subwoofer until the top of the subwoofer emits a flashing white light.
5. Wait for until 30 seconds while speakers are paired
6. Once pairing is complete, the “P” icon on the display screen of center speaker will disappear and
indicators on surround speakers and subwoofer will remain lit.
↑
↑
Status indicator
Pair
Speakers
Surround left
satellite speaker
Surround right
satellite speaker
Subwoofer
Status
Connected
No connection
Pairing
The indicator is
constantly lit RED
The indicator flashes
in a pulsing pattern
The indicator
continuously flashes
Summary of Contents for e255
Page 2: ......
