5
Start Recording
To start/stop recording, keep the control button
pressed for about seconds until the recorder’s
LED blinks. After that the recorder’s LED blinks 5
times and the recorder starts recording. In case of
a recording stop, the LED will flash once.
While recording, the sequences of LED flashes
show the approximate battery charge the first
sequence:
1 flash – fully charged ,
2 flashes – there is enough charge for work,
3 flashes – the battery is almost discharged (it
should be charged)
the second sequences show free memory
capacity:
1 flash – 76%-100%,
2 flashes –from 50% to 75%,
3 flashes – from 25% to 50%, and 4 flashes
– from 1% to 25%).
