16
to circular recording. After there is no more free
memory, the recorder begins to record new data
over old ones. The volume of the memory specified
determines the duration of the resulting circular
record.
Charging and Battery
Maintenance
The battery starts charging automatically when
you connect the recorder to the USB- port of
the computer. Full charging takes 3 hours (while
charging LED is flashing gradually with the interval
of 5 seconds). With maximum charging LED will
continuously and smoothly change its brightness.
The user can recharge the rechargeable battery
via power source with standard USB- output (5 V),
during which the LED is permanently on and one
can assess the process according to the charging
time only (3 hours).
Do not leave the rechargeable battery discharged.
Recharge it at least once a month, even if you
don't use the recorder . Failure of the battery due
to customer's fault is not covered by the warranty.
