EdgeMarc 4571/4571W Enterprise Session Border Controller Installation Guide
© Edgewater Networks, Inc. All rights reserved.
10
Wall-Mount Installation
You can mount the 4571/4571W on a wall using the two mounting brackets on the
bottom of the appliance. We recommend that you use two round or pan head screws.
1. Install two screws 203 mm horizontally apart on a wall or other vertical surface.
The screws should protrude from the wall so that you can fit the appliance between
the head of the screw and the wall.
If you install the screws in drywall, use hollow wall anchors to ensure that the unit
does not pull away from the wall due to prolonged strain from the cable and power
connectors.
2. Remove the 4571/4571W and accessories from the shipping container.
3. Mount the 4571/4571W on the wall as shown below.