Caution
Caution
Caution
Physical Installation
Secure the AC power cord to a cable management system using a fastener
or tie wrap to insure the EdgeMarc does not hang from the AC outlet.
1.
If connecting to an Internet router or Internet DMZ switch, connect the
Ethernet cable to the WAN Interface port (Port 2) on the EdgeMarc and the
other end to the WAN device.
2.
Power on the system.
Powering On the EdgeMarc 2900 series
1.
Turn on the EdgeMarc power switch.
2.
Make sure that the power and status LEDs on the front panel are solid green
after the EdgeMarc powers on.
3.
Proceed to
Chapter 5, Configuring Basic Network Settings
.
© 2017 Edgewater Networks. All Rights Reserved.
25