6. Continue configuring the switch using the “Configuration Menu” on the left side of the
web page and by referring to the user manual of the device.
Configuring 2404PoE through the console port
1. Connect one end of a null-modem cable to the serial port of the computer and the other
end to the console port of 2404PoE.
2. Configure the terminal emulation program to use:
a. Data bits: 8
b. Parity:
none
c. Stop bit: 1
d. Flow control: none
e. Baud rate: 9600
3. Press the return key and the following text should appear:
Page 4 of 6
