Edgewater Networks 225 Express, Owner'S Manual

Page: 40 / 49

Chapter 10 Routine Maintenance Chapter 10 Routine Maintenance
Chapter 10 Routine Maintenance Chapter 10 Routine Maintenance
Chapter 10 Routine Maintenance
4 0 4 0
4 0 4 0 4 0 EdgeWater 225 Express
slippery, which may not be desirable. When cleaning the vinyl, be gentle. Do not use cleaners that contain
ammonia, acetone, strong solvents, or powdered abrasive cleaners. They can damage and shorten the
vinyl’s life.
Sump Area
Your EdgeWater does not have a true bilge but rather a small sump area in the after part of the boat. This
can be maintained well by periodically using a boat bilge cleaner. Follow the directions carefully.
10.2 Engine 10.2 Engine
10.2 Engine 10.2 Engine
10.2 Engine
If you have a new engine with a built-in flushing device, the engine may be flushed without cranking. If the
engine does not have a built-in flush device one may be purchased to fit.
To flush the engine, after connecting a water hose to the proper connection, turn on the water. Put the
engine control in the idle position and crank the engine. Only let it run a couple of minutes. The gear case
is water-cooled and is not designed to run out of the water for extended periods.
Do not crank the engine without water running. Water acts as a coolant and also a lubricant for the
water pump.
Do not rev the engine when flushing; idle speed is sufficient!
The exterior of the engine will respond well to a good quality wax. This should be re-applied
every several months as the marine environment is a very harsh one and the constant sun
exposure will deteriorate your motor’s finish. Consult the engine manufacturer’s owner’s manual for specific
instructions. In areas where there is a conflict between this manual and the engine manufacturer’s manual,
the engine owner’s manual will take precedence.