EdgeMarc 200AE1 Network Services Gateway Installation Guide
10
Rack-Mount Installation
You can mount the 200AE1 in a 19” rack by using the rack-mount kit supplied with the product.
1. Attach the ear mounts to both sides of 200AE1 with the screws.
2. Attach the 200AE1 with the ear mounts to the shelf by screwing the ear mounts to the shelf
with screws.
Connecting the Power and Cables
The 200AE1 comes with an AC power cord and power adapter for connecting the unit to the
AC outlet.
Warning
Always connect the AC power cord to an AC outlet suitable for the power supply that came with
the unit in order to reduce the risk of damage to it.
•
Connect one end of the AC power cord to the power adapter and the other one to the AC
outlet.
•
Connect plug from the power adapter to the Power Connector on the 200AE1. A little force
may be necessary to get the plug properly positioned
Caution
Secure the power adapter using a fastener or tie wrap to nearby shelf so that it does not hang
from the power connector.
•
If connecting to a WAN router, cable modem or DSL modem, connect the Ethernet cable to
the Ethernet WAN port or ADSL port on the 200AE1 and the other end to the WAN device.
Summary of Contents for 200AE1
Page 20: ...Wall Mount Stencil...