manualshive.com logo in svg

Edgestore DAS501t, User Manual

Share
Download
Edgestore DAS501t User Manual Download Page 10

2.4  RAID VOLUME STATUS

 

 

A RAID volume can be in any one of the following statuses. 

 

 

STATUS

 

 

MEANING

 

Good

 

All disks are currently functioning as normal.

 

 

Reduced

 

For RAID levels that provide data protection, one or more disks have failed but the data is 
still available via the RAID algorithms. The failed disk should be replaced as soon as 
possible to avoid loss of data.

 

 

Rebuilding

 

A failed disk drive has been replaced and the data is being regenerated on the replacement 
disk. When complete, the RAID Group will return to Good status.

 

 

Resynchronizing

 

An error has occurred and RAID algorithms be regenerated on this RAID Group. When 
complete, the RAID Group will return to Good status.

 

 

Failed

 

One or more disks have failed and RAID algorithms can no longer regenerate the data. The 
minimum number of failures required to reach this state depends on the RAID level: 

a

 

RAID 0, Concatenated, Contiguous: Single disk failure. 

a

 

RAID 1, 10, and 5: Two disk failure.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Ver.071016 

DAS501t User’s Manual 

 

10 

Summary of Contents for DAS501t




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands