EdgeStar TWR247ESS Owner'S Manual Download Page 7

EdgeStar Thermoelectric Wine Cooler  

 

 

Electrical Requirements 

 
 
 

 
 
 

 
 
 
 
 
 
Before you move your wine cooler into its final location, it is 
important to make sure you have the proper electrical connection: 
A standard electrical supply (115 V, 60Hz), properly grounded in 
accordance with the National Electrical Code and local codes and 
ordinances, is required. 
 
The fuse (or circuit breaker) size should be 3 Amps.  

Recommended grounding method 

For your personal safety, this appliance must be grounded. It is 
equipped with a power supply cord having a 3-prong grounding 
plug. To minimize possible shock hazard, the cord must be plugged 
into a mating 3-pronged wall socket, and grounded in accordance 
with the National Electrical Code and local codes and ordinances. If 
a mating wall socket is not available, it is the personal responsibility 
of the customer to have a properly grounded, 3-prong wall 
receptacle installed by a qualified electrician. 

Leveling the Wine Cooler 

It is important for the wine cooler to be leveled in order to work 
properly. It can be raised or lowered by rotating the plastic sheaths 
around each of the feet on the bottom of the machine. If you find 
that the surface is not level, rotate the feet until the wine cooler 
becomes level .You may need to make several adjustments to level 
it. We recommend using a carpenter’s level to check the machine.  
 
1. Place a carpenter’s level on top of the product to see if the wine 
cooler is level from front to back and side to side. 
2. Adjust the height of the feet as follows: 
Turn the leveling feet to the right to lower that side of the 
refrigerator. 
Turn the leveling feet to the left to raise that side of the refrigerator. 
 
Note: You must adjust the feet to level the wine cooler.

E

E

L

L

E

E

C

C

T

T

R

R

I

I

C

C

 

 

S

S

H

H

O

O

C

C

K

K

 

 

H

H

A

A

Z

Z

A

A

R

R

D

D

!

!

 

 

 

Plug into a grounded 3-prong outlet. 

 

Never remove the grounding prong from the plug. 

 

Never use an adapter to bypass the grounding prong. 

 

DO NOT use an extension cord. 

 

Failure to follow these instructions can result in fire, 

electrical shock, or death. 

Tip: Use a surge protector 
to protect your wine cooler 
from electrical surges.

 

Summary of Contents for TWR247ESS















Reviews: