EdgeStar Built-in Ice Maker
6
Installation of Casters
]Important: Use at least two or more people to properly install casters.
Carefully have one person tilt the unit away from them while the other
person helps to support it. Make sure to give yourself enough
clearance to insert the caster and tightly screw in clockwise. Please
follow the diagram pictured below.
Leveling the Ice Maker
It is important for the icemaker to be leveled in order to work properly.
It can be raised or lowered by rotating the plastic sheaths around
each of the four feet on the bottom of the machine .If you find that
the surface is not level, rotate the feet until the ice maker becomes
level .You may need to make several adjustments to
level it. We recommend using a carpenter’s level to check the
machine.
1. Place a carpenter’s level on top of the product to see if the ice
maker is level from front to back and side to side .
2. Adjust the height of the feet as follows:
Turn the leveling feet to the right to lower that side of the ice maker
Turn the leveling feet to the left to raise that side of the ice maker .
IMPORTANT: Once you are ready to install it in a cabinet or directly on
the floor, you must adjust the feet to level the ice maker. If the floor is
level, just revolve the two front feet to touch the floor.