9
Control Panel Operations
Using the Control Panel
To Turn Unit on:
Press
On/Off Button
.
NOTE- The Energy Saver feature will
automatically turn
on in “Cool”, “Dry”, and “Auto” mode.
To Change Temperature:
Press or hold either Up
or Down
button until desired
temperature is seen on the digital display. This temperature will be
automatically maintained anywhere between 62 °F (17°C) and 86°F
(30°C). If you want the display to read the actual room
temperature, see “To Operate on Fan only” section.
To Adjust Fan Speeds:
To select the speed of the fan press Fan Speed
in four steps-
Auto, Low, Medium, or High. Each time the button is pressed the
fan speed mode is shifted. NOTE- During "Dry mode" the fan
speed is controlled at Low automatically.
To Select Operating Mode:
To choose operating mode press Mode
. Each time you press
the button a mode is selected in a sequence that goes from Auto,
Cool, Dry, Heat to Fan. The indicator light beside will be illuminated
and remain on once the mode is selected.
To operate on Auto Feature:
When you set the unit to “Auto” mode it will automatically
select cooling, heating, or fan only operation depending on
the temperature selected and the current room temperature.
On/Off
Energy Saver
Timer
Mode
Check Filter
Fan Speed
Sleep
Temp/Timer Up
Temp/Timer Down