7
Self-clean Function
1. Take out the ice basket.
2. Add a 10:1 mixture of water to vinegar.
3. Plug in the unit, and hold the CLEAN button for six (6) seconds. The self-
cleaning process will last about 5-6 minutes; after, the unit will automatically
power off. During this process, symbols
and
will display in the
LCD display window.
4. After the self-clean program is complete, drain out the water/vinegar mixture
by unplugging the drain cap on the side. Then close the drain cap.
5. Unplug the unit and add fresh water into reservoir up to
the “Max” water level
mark.
6. Plug the unit back in, and hold the CLEAN button for six (6) seconds again.
7. After the self-clean program is complete (within approximately 5-6 minutes),
drain out the water by unplugging the drain cap on the side.
8. Dry the interior and exterior with a soft and clean cloth.
9. Tighten the drain cap.
Suggestion:
When you first use the unit or have been not in use for a long time,
we suggest that you clean the unit according the above program first before
using.
Timer Function
How to set
When the unit is turned off, you can set its timer to start ice production sometime
in the future.
1). Press the
TIMER
button on the control panel.
will flash on the LCD
display at the top right.
2). Press the
SELECT
button to change the time delay to your desired number of
hours in the future. The timer ranges from 0.5 hours to 18 hours, changing in 0.5
hour increments.
3). After you have selected the time delay, do not press any buttons for three (3)
seconds. The timer display will then show the time remaining set time until the
unit will start ice production automatically according to your settings. Ice
production will begin once the timer reaches zero (0).
When the unit is turned on, you can set its timer to stop ice production after a set
duration.
1). Press the
TIMER
button on the control panel.
will flash on the LCD
display at the top right.
2). Press the
SELECT
button to change the time delay to your desired number of
hours in the future. The timer ranges from 0.5 hours to 18 hours, moving in 0.5
hour increments.
3). After you have selected the time delay, do not press any buttons for three (3)
seconds. The timer display will then show the time remaining set time until the
unit will stop ice production. Ice production will cease once the timer reaches
zero (0).
How to cancel
To cancel the timer setting, press the
TIMER
button twice.
Summary of Contents for IP250SS
Page 1: ......