6
Important
:
Before you begin, unplug the ice maker or disconnect the power.
Important: Once you are ready to install the icemaker in a cabinet or directly on the floor, you must
adjust the feet to level the ice maker. If the floor is level, just revolve the two front feet to touch the
floor.
Leveling the Ice Maker
It is important for the icemaker to be leveled in order to work properly. It can be raised or lowered by
rotating the plastic sheaths around each of the four feet on the bottom of the machine .If you find that
the surface is not level, rotate the feet until the ice maker becomes level .You may need to make
several adjustments to level it. We recommend using a carpenter’s level to check the machine.
1.
Place a carpenter’s level on top of the product to check if the ice maker is level from front to back
and side to side.
2. Adjust the height of the feet as follows:
Turn the leveling feet to the right to lower that side of the icemaker.
Turn the leveling feet to the left to raise that side of the icemaker.
Reversing the Door Swing
Tools needed: Flathead Screwdriver, Phillips Screwdriver
To Remove the Door from the Hinges
1. Using a Philips screwdriver, remove the screws and take off the top hinge. Keep the parts
together and set them aside.
2. Lift the door off the bottom hinge and turn it upside down so that the handle is on the right.
Set the door aside.